Kit Contents

The XL Premium Hunting Area Kit contains:

• 1 base with slides
• 1 peripheral ceiling and its plexiglass cover
• 4 plexiglass walls
• 1 hat with sliders
• 3 caps
• 8 feet
• 1 cover outline
• 1 handle for the lid
• 8 screws of 25mm
• 20 8mm screws
• 1 x 10mm screw
• 29 nuts

The assembly of the XL premium hunting area takes approximately 30 minutes.

Do not use a screwdriver to assemble the XL Premium Hunting Area, as the force exerted would be too strong and could damage it.

Step 1 - Mounting the base

Start by inserting a nut into each of the legs.

Fit the feet into their slots under the base.

Insert the 25mm screws from the top of the base and then screw them in.

Step 2 - Preparing the plexiglass plates

Remove the protective plastic from each side of the plexiglass plates.

Step 3 - Assembling the walls and the hat

The walls are placed in a staggered pattern against each other in the hat slides.

Make sure to align the holes in the walls with those in the hat.

Position the nuts in the locations provided for this purpose in the cap.

Screw 8mm screws from the outside of the cap into the nuts in place.

Position the peripheral ceiling inside the hat.

Screw the peripheral ceiling to the hat by positioning a nut inside and screwing 8mm screws from the outside.

Step 4 - Assembling the walls with the base

Position the walls in the base rails, making sure the tabs fit into the notches. This will align the holes in the walls with those in the base.

Position nuts in the appropriate holes inside the base.

Screw 8mm screws from the outside of the base into the nuts in place.

Step 5 - Lid Assembly

Screw the cover surround to the cover with the remaining 8mm screws. Screw the handle with the 10mm screw.

The assembly is complete

The XL Premium Hunting Area is ready to be connected like any other module.