Hunting area assembly guide

Kit Contents

The hunting area assembly kit contains:

The base of the module
1 peripheral ceiling as well as a plexiglass cover
3 caps
6 feet for hunting area XS, 7 feet for hunting area S, 8 feet for hunting area L
As many 30 mm screws as there are feet (25 mm screws for the XS hunting area)
As many nuts as there are feet
1 10 mm screw + 1 nut
1 handle
For the hunting area L with small cover, you will also find a cover outline as well as 4 8 mm screws with the associated nuts

It takes approximately 5 minutes to assemble a hunting area module.

Do not use a screwdriver for mounting a module, the force exerted would be too strong and risk damaging it.

Module assembly steps

Start by inserting the caps into the connection ports you want to close.

Insert the nuts into the legs.

Fit the feet into the slots provided for this purpose under the module.

Remove the protective films from both sides of the perimeter ceiling and the plexiglass cover. The protective films may leave some dust on the glass. To remove them, you can use the sticky side of one of the protective films or a clean microfiber cloth.